Book a Consultation

The Three Cs: šŸ¤Ā Concatenate, šŸ—œļøĀ Compress, šŸ—³ļøĀ Cache

Written by on CSS Wizardry.

Table of Contents
  1. šŸ¤ Concatenate
  2. šŸ—œļø Compress
  3. šŸ—³ļø Cache
  4. šŸ“” Connection
  5. šŸ“± Client
  6. My Advice
  7. The Future Is Brighter
    1. Shared Dictionary Compression for HTTP
    2. Compression Dictionaries
  8. tl;dr
  9. Appendix: Test Methodology

I began writing this article in early July 2023 but began to feel a little underwhelmed by it and so left it unfinished. However, after recent and renewed discussions around the relevance and usefulness of build steps, I decided to dust it off and get it finished.

Letā€™s go!

When serving and storing files on the web, there are a number of different things we need to take into consideration in order to balance ergonomics, performance, and effectiveness. In this post, Iā€™m going to break these processes down into each of:

  1. šŸ¤ Concatenating our files on the server: Are we going to send many smaller files, or are we going to send one monolithic file? The former makes for a simpler build step, but is it faster?
  2. šŸ—œļø Compressing them over the network: Which compression algorithm, if any, will we use? What is the availability, configurability, and efficacy of each?
  3. šŸ—³ļø Caching them at the other end: How long should we cache files on a userā€™s device? And do any of our previous decisions dictate our options?

šŸ¤ Concatenate

Concatenation is probably the trickiest bit to get right because, even though the three Cs happen in order, decisions we make later will influence decisions we make back here. We need to think in both directions right now.

Back in the HTTP/1.1 world, we were only able to fetch six resources at a time from a given origin. Given this limitation, it was advantageous to have fewer files: if we needed to download 18 files, thatā€™s three separate chunks of work; if we could somehow bring that number down to six, itā€™s only one discrete chunk of work. This gave rise to heavy bundling and concatenationā€”why download three CSS files (half of our budget) if we could compress them into one?

Given that 66% of all websites (and 77% of all requests) are running HTTP/2, I will not discuss concatenation strategies for HTTP/1.1 in this article. If you are still running HTTP/1.1, my only advice is to upgrade to HTTP/2.

With the introduction of HTTP/2, things changed. Instead of being limited to only six parallel requests to a given origin, we were given the ability to open a connection that could be reused infinitely. Suddenly, we could make far more than six requests at a time, so bundling and concatenation became far less relevant. An anti pattern, even.

Or did it?

It turns out H/2 acts more like H/1.1 than you might thinkā€¦

As an experiment, I took the CSS Wizardry homepage and crudely added Bootstrap. In one test, I concatenated it all into one big file, and the other had the library split into 12 files. Iā€™m measuring when the last stylesheet arrives1, which is denoted by the vertical purple line. This will be referred to as css_time.

Read the complete test methodology.

Plotted on the same horizontal axis of 1.6s, the waterfalls speak for themselves:

201ms of cumulative latency; 109ms of cumulative download. (View full size.)

With one huge file, we got a 1,094ms css_time and transferred 18.4KB of CSS.

4,362ms of cumulative latency; 240ms of cumulative download. (View full size.)

With many small files, as ā€˜recommendedā€™ in HTTP/2-world, we got a 1,524ms css_time and transferred 60KB of CSS. Put another way, the HTTP/2 way was about 1.4Ɨ slower and about 3.3Ɨ heavier.

What might explain this phenomenon?

When we talk about downloading files, weā€”generally speakingā€”have two things to consider: latency and bandwidth. In the waterfall charts above, we notice we have both light and dark green in the CSS responses: the light green can be considered latency, while the dark green is when weā€™re actually downloading data. As a rule, latency stays constant while download time is proportional to filesize. Notice just how much more light green (especially compared to dark) we see in the many-files version of Bootstrap compared to the one-big-file.

This is not a new phenomenonā€”a client of mine suffered the same problem in July, and the Khan Academy ran into the same issue in 2015!

If we take some very simple figures, we can soon model the point with numbersā€¦

Say we have one file that takes 1,000ms to download with 100ms of latency. Downloading this one file takes:

(1 Ɨ 1000ms) + (1 Ɨ 100ms) = 1,100ms

Letā€™s say we chunk that file into 10 files, thus 10 requests each taking a tenth of a second, now we have:

(10 Ɨ 100ms) + (10 Ɨ 100ms) = 2,000ms

Because we added ā€˜nine more instances of latencyā€™, weā€™ve pushed the overall time from 1.1s to 2s.

In our specific examples above, the one-big-file pattern incurred 201ms of latency, whereas the many-files approach accumulated 4,362ms by comparison. Thatā€™s almost 22Ɨ more!

Itā€™s worth noting that, for the most part, the increase is parallelised, so while it amounts to 22Ɨ more overall latency, it wasnā€™t back-to-back.

It gets worse. As compression favours larger files, the overall size of the 10 smaller files will be greater than the original one file. Add to that the browserā€™s scheduling mechanisms, weā€™re unlikely to dispatch all 10 requests at the same time.

So, it looks like one huge file is the fastest option, right? What more do we need to know? We should just bundle everything into one, no?

As I said before, we have a few more things to juggle all at once here. We need to learn a little bit more about the rest of our setup before we can make a final decision about our concatenation strategy.

šŸ—œļø Compress

The above tests were run with Brotli compression2. What happens when we adjust our compression strategy?

As of 2022, roughly:

  • 28% of compressible responses were Brotli encoded;
  • 46% were Gzipped;
  • 25% were, worryingly, not compressed at all.

What might each of these approaches mean for us?

Compression Bundling css_time (ms)
None One file 4,204
Many files 3,663
Gzip One file 1,190
Many files 1,485
Brotli One file 1,094
Many files 1,524
If you canā€™t compress your files, splitting them out is faster.

Viewed a little more visually:

(View full size.)

These numbers tell us that:

  • at low (or no) compression, many smaller files is faster than one large one;
  • at medium compression, one large file is marginally faster than many smaller ones;
  • at higher compression, one large file is markedly faster than many smaller ones.

Basically, the more aggressive your ability to compress, the better youā€™ll fare with larger files. This is because, at present, algorithms like Gzip and Brotli become more effective the more historical data they have to play with. In other words, larger files compress more than smaller ones.

This shows us the sheer power and importance of compression, so ensure you have the best setup possible for your infrastructure. If youā€™re not currently compressing your text assets, that is a bug and needs addressing. Donā€™t optimise to a sub-optimal scenario.

This looks like another point in favour of serving one-big-file, right?

šŸ—³ļø Cache

Caching is something Iā€™ve been obsessed with lately, but for the static assets weā€™re discussing today, we donā€™t need to know much other than: cache everything as aggressively as possible.

Each of your bundles requires a unique fingerprint, e.g. main.af8a22.css. Once youā€™ve done this, caching is a simple case of storing the file forever, immutably:

Cache-Control: max-age=2147483648, immutable
  • max-age=2147483648: This directive instructs all caches to store the response for the maximum possible time. Weā€™re all used to seeing max-age=31536000, which is one year. This is perfectly reasonable and practical for almost any static content, but if the file really is immutable, we might as well shoot for forever. In the 32-bit world, forever is 2,147,483,648 seconds, or 68 years.
  • immutable: This directive instructs caches that the fileā€™s content will never change, and therefore to never bother revalidating the file once its max-age is met. You can only add this directive to responses that are fingerprinted (e.g. main.af8a22.css)

All static assetsā€”provided they are fingerprintedā€”can safely carry such an aggressive Cache-Control header as theyā€™re very easy to cache bust. Which brings me nicely on toā€¦

The important part of this section is cache busting.

Weā€™ve seen how heavily-concatenated files compress better, thus download faster, but how does that affect our caching strategy?

While monolithic bundles might be faster overall for first-time visits, they suffer one huge downfall: even a tiny, one-character change to the bundle would require that a user redownload the entire file just to access one trivial change. Imagine having to fetch a several-hundred kilobyte CSS file all over again for the sake of changing one hex code:

  .c-btn {
-   background-color: #C0FFEE;
+   background-color: #BADA55;
  }

This is the risk with monolithic bundles: discrete updates can carry a lot of redundancy. This is further exacerbated if you release very frequently: while caching for 68 years and releasing 10+ times a day is perfectly safe, itā€™s a lot of churn, and we donā€™t want to retransmit the same unchanged bytes over and over again.

Therefore, the most effective bundling strategy would err on the side of as few bundles as possible to make the most of compression and scheduling, but enough bundles to split out high- and low-rate of change parts of your codebase so as to hit the most optimum caching strategy. Itā€™s a balancing act for sure.

šŸ“” Connection

One thing we havenā€™t looked at is the impact of network speeds on these outcomes. Letā€™s introduce a fourth Cā€”Connection.

I ran all of the tests over the following connection types:

  • 3G: 1.6 Mbps downlink, 768 Kbps uplink, 150ms RTT
  • 4G: 9 Mbps downlink, 9 Mbps uplink, 170ms RTT
  • Cable: 5 Mbps downlink, 1 Mbps uplink, 28ms RTT
  • Fibre: 20 Mbps downlink, 5 Mbps uplink, 4ms RTT
All variants begin to converge on a similar timing as network speed improves. (View full size.)

This data shows us that:

  1. the difference between no-compression and any compression is vast, especially at slower connection speeds;
    • the helpfulness of compression decreases as connection speed increases;
  2. many smaller files is faster at all connection speeds if compression is unavailable;
  3. one big file is faster at all connection speeds as long as it is compressed;
    • one big file is only marginally faster than many small files over Gzip, but faster nonetheless, and;
    • one big file over Brotli is markedly faster than many small files.

Again, no compression is not a viable option and should be considered a bugā€”please donā€™t design your bundling strategy around the absence of compression.

This is another nod in the direction of preferring fewer, larger files.

šŸ“± Client

Thereā€™s a fifth C! The Client.

Everything weā€™ve looked at so far has concerned itself with network performance. What about what happens in the browser?

When we run JavaScript, we have three main steps:

  1. Parse: the browser parses the JavaScript to create an AST.
  2. Compile: the parsed code is compiled into optimised bytecode.
  3. Execute: the code is now executed, and does whatever we wanted it to do.

Larger files will inherently have higher parse and compile times, but arenā€™t necessarily slower to execute. Itā€™s more about what your JavaScript is doing rather than the size of the file itself: itā€™s possible to write a tiny file that has a far higher runtime cost than a file a hundred times larger.

The issue here is more about shipping an appropriate amount of code full-stop, and less about how itā€™s bundled.

As an example, I have a client with a 2.4MB main bundle (unfortunately that isnā€™t a typo) which takes less than 10ms to compile on a mid-tier mobile device.

My Advice

  • Ship as little as you can get away with in the first place.
    • Itā€™s better to send no code than it is to compress 1MB down to 50KB.
  • If youā€™re running HTTP/1.1, try upgrade to HTTP/2 or 3.
  • If you have no compression, get that fixed before you do anything else.
  • If youā€™re using Gzip, try upgrade to Brotli.
  • Once youā€™re on Brotli, it seems that larger files fare better over the network.
    • Opt for fewer and larger bundles.
  • The bundles you do end up with should, ideally, be based loosely on rate or likelihood of change.

If you have everything in place, then:

  • Bundle infrequently-changing aspects of your app into fewer, larger bundles.
  • As you encounter components that appear less globally, or change more frequently, begin splitting out into smaller files.
  • Fingerprint all of them and cache them forever.
  • Overall, err on the side of fewer bundles.

For example:

<head>

  <script src=vendor.1a3f5b7d.js   type=module></script>
  <script src=app.8e2c4a6f.js      type=module></script>
  <script src=home.d6b9f0c7.js     type=module></script>
  <script src=carousel.5fac239e.js type=module></script>

</head>
  • vendor.js is needed by every page and probably updates very infrequently: we shouldnā€™t force users to redownload it any time we make a change to any first-party JS.
  • app.js is also needed by every page but probably updates more often than vendor.js: we should probably cache these two separately.
  • home.js is only needed on the home page: thereā€™s no point bundling it into app.js which would be fetched on every page.
  • carousel.js might be needed a few pages, but not enough to warrant bundling it into app.js: discrete changes to components shouldnā€™t require fetching all of app.js again.

The Future Is Brighter

The reason weā€™re erring on the side of fewer, larger bundles is that currently-available compression algorithms work by compressing a file against itself. The larger a file is, the more historical data there is to compress subsequent chunks of the file against, and as compression favours repetition, the chance of recurring phrases increases the larger the file gets. Itā€™s kind of self-fulfilling.

Understanding why things work this way is easier to visualise with a simple model. Below (and unless you want to count them, youā€™ll just have to believe me), we have one-thousand a characters:

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

This takes up 1,000 bytes of data. We could represent these one-thousand as as 1000(a), which takes up just seven bytes of data, but can be multiplied back out to restore the original thousand-character string with no loss of data. This is lossless compression.

If we were to split this string out into 10 files each containing 100 as, weā€™d only be able to store those as:

100(a)
100(a)
100(a)
100(a)
100(a)
100(a)
100(a)
100(a)
100(a)
100(a)

Thatā€™s ten lots of 100(a), which comes in at 60 bytes as opposed to the seven bytes achieved with 1000(a). While 60 is still much smaller than 1,000, itā€™s much less effective than one large file as before.

If we were to go even further, one-thousand files with a lone a character in each, weā€™d find that things actually get larger! Look:

harryroberts in ~/Sites/compression on (main)
Ā» ls -lhFG
total 15608
-rw-r--r--    1 harryroberts  staff   1.0K 23 Oct 09:29 1000a.txt
-rw-r--r--    1 harryroberts  staff    40B 23 Oct 09:29 1000a.txt.gz
-rw-r--r--    1 harryroberts  staff     2B 23 Oct 09:29 1a.txt
-rw-r--r--    1 harryroberts  staff    29B 23 Oct 09:29 1a.txt.gz

Attempting to compress a single a character increases the file size from two bytes to 29. One mega-file compresses from 1,000 bytes down to 40 bytes; the same data across 1,000 files would cumulatively come in at 29,000 bytesā€”thatā€™s 725 times larger.

Although an extreme example, in the right (wrong?) circumstances, things can get worse with many smaller bundles.

Shared Dictionary Compression for HTTP

There was an attempt at compressing files against predefined, external dictionaries so that even small files would have a much larger dataset available to be compressed against. Shared Dictionary Compression for HTTP (SDHC) was pioneered by Google, and it worked by:

ā€¦using pre-negotiated dictionaries to ā€˜warm upā€™ its internal state prior to encoding or decoding. These may either be already stored locally, or uploaded from a source and then cached.
ā€” SDHC

Unfortunately, SDHC was removed in Chrome 59 in 2017. Had it worked out, weā€™d have been able to forgo bundling years ago.

Compression Dictionaries

Friends Patrick Meenan and Yoav Weiss have restarted work on implementing an SDCH-like external dictionary mechanism, but with far more robust implementation to avoid the issues encountered with previous attempts.

While work is very much in its infancy, it is incredibly exciting. You can read the explainer, or the Internet-Draft already. We can expect Origin Trials as we speak.

The early outcomes of this work show great promise, so this is something to look forward to, but widespread and ubiquitous support a way off yetā€¦

tl;dr

In the current landscape, bundling is still a very effective strategy. Larger files compress much more effectively and thus download faster at all connection speeds. Further, queueing, scheduling, and latency work against us in a many-file setup.

However, one huge bundle would limit our ability to employ an effective caching strategy, so begin to conservatively split out into bundles that are governed largely by how often theyā€™re likely to change. Avoid resending unchanged bytes.

Future platform features will pave the way for simplified build steps, but even the best compression in the world wonā€™t sidestep the way HTTPā€™s scheduling mechanisms work.

Bundling is here to stay for a while.


Appendix: Test Methodology

To begin with, I as attempting to proxy the performance of each by taking the First Contentful Paint milestone. However, in the spirit of measuring what I impact, not what I influence, I decided to lean on the User Timing API and drop a performance.mark() after the last stylesheet:

<link rel=stylesheet href=...>

<script>
  const css_time = performance.mark('css_time');
</script>

I can then pick this up in WebPageTest using their Custom Metrics:

[css_time]
return css_time.startTime

Now, I can append ?medianMetric=css_time to the WebPageTest result URL and automatically view the most representative of the test runs. You can also see this data in WebPageTestā€™s Plot Full Results view:

For the one-big-file version, outliers were pushing 1.5s. (View full size.)

  1. More or less. Itā€™s accurate enough for this experiment. To be super-thorough, I should really grab the latest single responseEnd value of all of the CSS files, but weā€™d still arrive at the same conclusions.Ā 

  2. All compression modes were Cloudflareā€™s default settings and applied to all resources, including the host HTML document.Ā 


By Harry Roberts

Harry Roberts is an independent consultant web performance engineer. He helps companies of all shapes and sizes find and fix site speed issues.



Did this help? We can do way more!


Hi there, Iā€™m Harry Roberts. I am an award-winning Consultant Web Performance Engineer, designer, developer, writer, and speaker from the UK. I write, Tweet, speak, and share code about measuring and improving site-speed. You should hire me.

You can now find me on Mastodon.


Suffering? Fix It Fast!

Projects

  • inuitcss
  • ITCSS ā€“ coming soonā€¦
  • CSS Guidelines

Next Appearance

Learn:

I am available for hire to consult, advise, and develop with passionate product teams across the globe.

I specialise in large, product-based projects where performance, scalability, and maintainability are paramount.